When users operate wire drawing machine equipment, they often encounter some troubles. The more common problems are that the host of the equipment cannot be started and the wire breaking phenomenon occurs frequently. So, after encountering such a problem, how can we quickly solve it so that the wire drawing machine equipment can return to normal working state? Let’s take a look at the specific content below, I hope it will be helpful.
First, let’s analyze why the wire drawing machine equipment cannot be started. In fact, there are many factors for this situation. The first reason is that the control power switch of the equipment is not adjusted to the ON state. At this time, we should adjust the control power switch to ON.
The second reason may be due to the problem of line breakage and shutdown during the last production process, or it was caused by not resetting in time after the shutdown, so resetting can solve it at this time.
The third reason may be that the emergency stop button of the wire drawing machine equipment is not closed, and the button should be closed at this time. The fourth reason is that the inverter cannot be turned on due to tripping. At this time, you can refer to the information displayed on the inverter display board for operation, then turn off the main power, wait for 30 seconds and restart.
Another headache is that the wire often breaks during the operation of the wire drawing machine. This will cause us a lot of waste, so we must solve this problem in time. The reasons for this problem include many aspects. For example, it may be due to improper configuration of the eye mold used, and the eye mold should be reconfigured.
In addition, it may also be due to the wire drawing machine running too fast, causing the wire to break; or the quality of the wire itself has problems, and the wire should be replaced; or the lubricant used has deteriorated and should be replaced.
